For "Fitment and Compatibility"; please check the section above
Copper Grease (Anti Seize) for Motorcycle Maintenance :
Copper Grease is a good investment for people who really know how to take care of there bikes. its essential when you remove non-structural bolts on your machine (like brake caliper bolts) and then apply a bit of grease to prevent them seizing up over time. Just remember to tighten them to the correct torque setting.
Copper based Anti-seize Compound used in to prevent seizure of threaded connection and mating surface due to high temperature operations, corrosive atmospheres & moisture ingression. This grease is fabricated by using supreme quality raw materials like copper and solid lubricants. We hope you guys like it.
Nuts and bolts for things that might need moving including tyre axle, foot pegs clevis etc but for break caliper nuts/ foot pegs bolt thread lock will work cause you would want them not to get loose.
Assembly compound for Cylinder heads
Press fits, Slipper pads, Propeller Shafts
Heavily loaded Swivel and Journal bearings, large gears, and Rotary Kilns.
COPPER GREASE Protects against wet, dirty conditions and chemical attack. High temperature.Temperature range: (-40°C to + 1100°C.)
Prevents galling seizure during assembly or dismantling. Resistant to high load. This is almost indestructible film. Easy releasing.
Size: 400ml Approximately
Container: Pearl Pet Plastic
While Motousher works to ensure that the product information, on the website, is accurate and correct, on occasions, the concerned manufacturers may alter or modify their products' ingredients or configurations, as the case may be. Actual product packaging and materials may contain more and/or different information than that is shown on Motousher's website. Motousher recommends that you do not solely rely on the product information available on the website and that you always read warnings, descriptions, labels and directions, printed on the product, before using or consuming a product. For any additional information about a product, please contact the concerned manufacturer or refer to their website.