For "Fitment and Compatibility"; please check the section above
RAM Motorcycle Handlebar Clamp Base with M8 Screws
Have an M8 by 25, 30, or 35 mm handlebar bolt.
The RAM-B-367U will replace that bolt with
A standard ball-mount to put just about anything there.
Included with Purchase:
(1 QTY) 1" Rubber ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
(1) M8 x 55mm Socket Head Cap Screw
(1) M8 x 60mm Socket Head Cap Screw
(1) M8 x 65mm Socket Head Cap Screw
B Size (1")
Standard Use: 2 lbs
Heavy-Duty Use: 1 lb
To determine if these bolts are compatible with your motorcycle measure the bolt for the diameter and add 30mm to the length. If it matches one of the 55, 60, or 65 mm lengths, then you can use the appropriate bolt supplied with the mount. If it does not match, you may be able to source the correct length of bolt locally or from your BMW dealer. Be sure to use the correct torque spec when attaching the mount.
Part Number:- RAM-B-367U
Brand:- RAM Mount
MANUFACTURER : NATIONAL PRODUCTS INC | COUNTRY OF IMPORT : USA
ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY.
While Motousher works to ensure that the product information, on the website, is accurate and correct, on occasions, the concerned manufacturers may alter or modify their products' ingredients or configurations, as the case may be. Actual product packaging and materials may contain more and/or different information than that is shown on Motousher's website. Motousher recommends that you do not solely rely on the product information available on the website and that you always read warnings, descriptions, labels and directions, printed on the product, before using or consuming a product. For any additional information about a product, please contact the concerned manufacturer or refer to their website.