Posi Tap® Connector (6-4sqmm)

Brand: Posi-Products

Category: Electricals | Part No EX-350Y

Posi Tap® Connector (6-4sqmm)
Posi Tap® Connector (6-4sqmm)

Photos are for reference only

Ask a question

M.R.P.

Rs. 180.00   /-

inclusive of all taxes


DELIVERY QUESTIONS ? Shipping & Delivery FAQ's

COUNTRY OF ORIGIN: HONG KONG

BEST BEFORE: TEN YEARS FROM DATE OF IMPORT / PACKAGING

WARRANTY INFO: REPLACEMENT (30 DAYS FROM ORDER)

COMMON GENERIC NAME : ELECTRICAL CONNECTORS

NET QUANTITY : 1N


Part No EX-350Y

Have something to say about this product? Compatibility or fitment related! Bring it to our order processing teams attention, by writing below

Availability: 1 or more unit(s) in stock!

For "Fitment and Compatibility"; please check the section above

Electrical Connector - Posi-Tap®

Posi-Tap® connectors allows you to tap into wires without cutting!

  • Total wire integrity is maintained
  • Installs in seconds by hand - No crimping or tools required
  • Reusable or permanent
  • Less resistance
  • Vibration proof
  • Fully insulated
  • Powers up to 4 leads at once! 

POSI-TAP Connector meet or exceeds:

  • SAEJ1211 Section 3.2.3
  • Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5
  • Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test

Types Available in 

  • Posi-Tap® Line Tap 4 - 6 sq.mm  (10-12ga)
  • Accessory lead (12-18 ga)

Posi-Tap Installation Instructions

Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock.

Note: Larger Posi-Locks require 1/2" of stripped wire, and smaller ones require 3/8" of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8" stripped on the tapping wire only. The tapped wire is not stripped.

 

Here is a side view showing the point that pierces the wire for the tap. Remove this large cap and the smaller cap. Start by inserting fully the wire to be tapped as shown in the next photo below.

Slide the large cap over the wire as far as it will go. Here, the wire to be tapped is inserted and ready to tap.

Here the tap is started carefully onto the threads of the large cap. Make sure the pin is centred on the wire when the pin contacts the wire. Keep the Posi-Tap straight to do this.

Continue to thread by hand until the wire is tightly tapped.

Now, complete the Posi-Tap install, by stripping and installing the tapping wire, as shown below.

MANUFACTURER: SWENCO INC | COUNTRY OF IMPORT : UNITED STATES OF AMERICA
IMPORTED AND MARKETED BY : PLUSGROW MERCHANTRY PVT LTD (U51909MH2018PTC318387) T 31A, MIDC INDUSTRIAL AREA, HINGNA RD, NAGPUR 440016 MH

ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY.

Disclaimer: While Motousher works to ensure that the product information, on the website, is accurate and correct, on occasions, the concerned manufacturers may alter or modify their products' ingredients or configurations, as the case may be. Actual product packaging and materials may contain more and/or different information than that is shown on Motousher's website. Motousher recommends that you do not solely rely on the product information available on the website and that you always read warnings, descriptions, labels and directions, printed on the product, before using or consuming a product. For any additional information about a product, please contact the concerned manufacturer or refer to their website.